Operation Manual

8120 Installation and Operation Manual78
18-9 Installation: DSC VHF radio
Fit and set up the optional Navman DSC VHF
radio following the instructions supplied with
the radio.
During setup:
a) on the radio, enter buddy boats required
b) on the Instrument, set NavBus to (see
section 17-10)
Power/data cable
Orange
Blue
Radio power/data cable
18-10 Installation: SmartCraft
If the boat has one or two SmartCraft capable
Mercury petrol/gasoline engines, connect the
Instrument to the SmartCraft engines with
an optional SmartCraft gateway. The display
unit can display engine data and trim and can
control troll speed.
Note:
Fit a single gateway for single engines and
a dual gateway for dual engines.
SmartCraft engines have fuel flow sensors,
therefore Navman fuel sensors are not
required as well.
An optional GPS/fuel Y cable is required.
If the fuel tank does not have SmartCraft
level sensors, wire for auto power (see
section 18-4).
During setup, set Y cable to (see section
17-1) and enter the SmartCraft setup data.
For information on installing, setting up
and using SmartCraft, see the SmartCraft
Gateways Installation and Operation Manual.
Black
Smartcraft Gateway
White