Wireless N ADSL2+ Modem Router RG-A100L Instruction Manual
Contents Contents......................................................................................... 2 Important Product Information ....................................................... 3 FCC Regulatory Statements .......................................................... 4 Safety Instructions ......................................................................... 6 Notice ........................................................................................... 13 1. Package Contents ..........
Important Product Information Important safety information regarding radio frequency (RF) exposure and use when worn To ensure compliance at all times with the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC* (R&TTE Directive) the equipment when in operation requires a minimum of 7cm separation from the body. Failure to observe these instructions could result in your RF exposure exceeding the compliance with Annex II of Council Recommendation 1999/519/EC.
FCC Regulatory Statements FCC part 68 This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a label that contains the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. You must provide this information to the telephone company upon request. The REN is useful to determine the quantity of devices you may connect to the telephone line and still have those entire devices ring when your number is called.
FCC part 15 This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC regulations. These limits are designed to provide reasonable protection against harmful interface in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Instructions Please read these Safety Instructions carefully before using this product. These Safety Instructions show items that must be followed to prevent danger to any person and damage to property. Alert symbols below are important to fully understand these Safety Instructions. Alert symbols in this instruction manual Warning : Indicates a hazardous situation which could result in death or serious injury.
Warning ●Do not scratch, damage, or modify the power cord. Also, do not forcibly bend, pull, twist or tie the cord. Otherwise, a fire or electric shock may occur. If the power cord is excessively pressed or heated up, the cord may be damaged and a fire and electric shock may occur. ●Do not use an overloaded multi-plug adaptor. Otherwise, the multi-plug adaptor may heat up and be degraded, and then a fire may occur. ●For this product, only use the provided AC adaptor.
Warning In these cases ●Do not use this product if it smokes or has an abnormal odor. Otherwise, a fire or electric shock may occur. Remove the AC adapter from the outlet immediately. Make sure that this product stops smoking, and call the repair center or customer service shown in the attached form. Never try to repair this product on your own.
Warning ●Do not use this product with the power cord damaged, for example with the core exposed or cut. Otherwise, a fire or electric shock may occur. Immediately remove the AC adaptor from the outlet and call the repair center or customer service shown in the attached form. ●If this product is dropped or damaged, remove the AC adaptor from the outlet immediately and call the repair center or customer service shown in the attached form.
Warning Other warnings ●Turn off this product in any place where use of a wireless device is prohibited, for example in an airplane or hospital. Otherwise, it may influence electronics and medical devices, and cause an incident. ●Do not place or use this product near high-precision electronics or devices which handle weak signals, for example pacemakers. Otherwise, electronics such as pacemakers may malfunction.
Caution Where you should place this product ●Do not place this product in an area exposed to direct sunlight, near a heat generating appliance such as a stove or a heater, or in a highly hot place. Otherwise, the internal parts of this product may heat up, and a fire may occur. ● Do not place this product in a place where the temperatures change dramatically, for example near an air conditioner or a heater.
Caution Power ●When using this product, ensure that the power plug is securely inserted into the outlet. Remove the power plug from the outlet by pulling on the plug. Do not pull the power cord. Otherwise, it may be damaged, and a fire or electric shock may occur. ●Do not use in a state in which there is an accumulation of dust between the power plug and outlet. Regularly, or once every six months, remove dust. Otherwise, a fire may occur.
Notice Indicates a situation which could result in this product performing poorly or malfunctioning.
What you must not do ●Do not drop or hit this product. Otherwise, it may malfunction. ● Do not leave this product in a cold place such as an ice warehouse. Otherwise, this product may operate abnormally. ●Disconnect all cords before moving this product. Otherwise, it may malfunction. ●This product may operate abnormally if the connecting cords are disconnected when it is on, or if the connection is unstable. When this product is on, do not touch the connecting parts.
Security notes on wireless LAN products Wireless LAN has the advantage of a LAN connection without the use of LAN cables if the device is placed within the reach of radio waves. You can send and receive information between devices that use radio waves such as a computer and the wireless LAN access point (base unit).
1. Package Contents This product package contains the following items. □RG-A100L □AC adaptor □Line cable (1) *The antenna and the main unit are packaged separately.
2. Part Names and Functions Top Indicators Name (1) WPS (2) WLAN (3) Internet (4) DSL (5) LAN(1~4) Display Color of lamp Illuminating in green. Blinking in green. OFF Illuminating in green. Blinking in green. OFF Illuminating in green. Blinking in green. Illuminating in red. OFF Illuminating in green. Blinking in green. OFF Illuminating in green. Blinking in green. OFF 17 Condition WPS setting succeeded. WPS is starting up. WPS is ready to start up. Wireless connection is established.
Indicators Name (6) Power Display Color of lamp Illuminating in green. Illuminating in red. OFF 18 Condition Power is on.(normal) Device startup failed. Power is off.
Back Ports and others Name Display (1) DCIN jack Description Connect the AC adaptor to this jack. (2) LAN port LAN(1~4) (3) DSL port DSL Connect the Ethernet cable to this port. Connect the Line cable to this port. Configuration switch Name (4) Power ON/OFF switch (5) Reset switch Display Description ON/OFF This switch is for turning this product on or off. RESET This switch is for initialization. Please use a non-conductive stick such as toothpick to push the recessed reset switch.
Side Switch Name (1) WPS switch Display WPS Description This switch is configurations.
Product label Look at the product label on the bottom of this product to configure a wireless LAN terminal [client]. *The label is an example.
3. Installation Space This product should be installed and operated with a minimum separation of 7 cm from any nearby walls (on all sides except the bottom). Caution This product heats up excessively if it is installed in a poorly ventilated area. It may cause a malfunction. Keep this product away from refrigerators, TV sets and other noise sources.
4. Network Setup (1) Access the ADSL line. ① Connect the Splitter's DSL port and this product's DSL port using the Line cable. ② Connect the Splitter's Phone port and the Phone's Line port using the Telephone line cable. ③ Connect the Splitter's Line port into the modular jack. PC (2) Connect the PC. Turn off the PC beforehand. Connect the LAN port of this product and your PC using an Ethernet cable. (3) Connect the AC adaptor to the DCIN jack. (4) Plug the AC adaptor into an outlet.
(5) Turn on this product by pushing the power ON/OFF switch. (6) Make sure that the power lamp illuminates in green. Caution Ensure that you make connections in accordance with the instruction manual. Any connection mistakes may cause a malfunction in the connected devices or connection equipment.
5. Web Setting (1) Start the PC and others. (2) Start a WWW browser, enter "http://192.168.1.1/" and open the page for Web configurations. (3) Enter the user name and password. The user name is "admin" and the password is "1234" (default value). (4) Select the menu you want to modify, and proceed.
6. Products Specifications Item DSL port Physical interface Port Type LAN port Physical interface Port Type Antenna IEEE802.11b Wireless LAN IEEE802.11g IEEE802.11n Operating conditions Dimensions Power source Power consumption Weight Condition 6 PIN modular jacks (RJ-11) 1 port Type ITU-T G.992.1/2/3/5 Annex A/L/M ANSI T1.413 8 PIN modular jacks (RJ-45) 4 ports (switching hub built in) 100BASE-TX/10BASE-T (IEEE802.3u/IEEE802.3) Auto MDI/MDI-X External Antenna Frequency 2.
Notice (1) All rights reserved. No part of this manual may be copied or reproduced without prior permission. (2) Contents of this manual may change without notice. (3) We take every possible precaution to ensure the accuracy of this manual, but if anything is unclear or erroneous in the content, please contact us. (http://www.necat.co.
Customer Information FCC 68 Customer Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label that contains, among other information, a product identifier of [US: 7S4DL03BRG-A100L]. If requested, this number must be provided to the telephone company.
Service Requirements In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. It is the responsibility of users requiring service to report the need for service to our Company or to one of our authorized agents. Service can be facilitated through our office at: Company name: NEC Corporation of America Company Company address: 6535 N.
NEC AccessTechnica, Ltd.