Operation Manual

101

5. Using On-Screen Menu

[OPTIONS(2)]

SelectingStandbyconditionin[STANDBYMODE]

Theprojectorhastwostandbymodes:[NORMAL]and[NETWORKSTANDBY].

The[NORMAL]modeisthemodethatallowsyoutoputtheprojectorinthepower-savingconditionwhichconsumes

lesspowerthanthe[NETWORKSTANDBY]mode.Theprojectorispresetforthe[NORMAL]modeatthefactory.

NORMAL ��POWER indicator: Red light/STATUS indicator: Off

When [NORMAL] is selected, only the following buttons and feature will work:

POWER button on the projector cabinet and the remote control, and powering on from PC Control

command�

NETWORK STANDBY ��POWER indicator: Orange light/STATUS indicator: Off

When [NETWORK STANDBY] is selected, the projector can be turned on over a wired LAN connec-

tion and only the following buttons, port, and features will work:

POWER button on the projector cabinet and the remote control, powering on from PC Control

command, DIRECT POWER ON, AUTO POWER ON(COMP�), LAN port, wireless LAN unit (optional),

Virtual Remote Tool, LAN feature, and Mail Alert feature�

Important:

- When[NETWORKSTANDBY]isselected,[AUTOPOWEROFF]willturngreyincolorandbedisabled,and[0:15]willbeselected

automatically.

NOTE:

• Evenwhen[NORMAL]or[NETWORKSTANDBY]isselectedfor[STANDBYMODE],poweronoroffcanbedonebyusingthePC

CONTROLport.

• ThepowerconsumptioninthestandbymodewillnotbeincludedincalculatingCO

emissionreduction.

• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

EnablingDirectPowerOn[DIRECTPOWERON]

Turnstheprojectoronautomaticallywhenthepowercordisinsertedintoanactivepoweroutlet.Thiseliminatesthe

needtoalwaysusethePOWERbuttonontheremotecontrolorprojectorcabinet.