Nec M302WS : Operation Manual : Page 115

104

5. Using On-Screen Menu

[3D]

Selectinginputconnectedtoasourceof3Dimages[COMPUTER/HDMI1/HDMI2/VIDEO]

[3D]

Thisfunctionswitchesthe3DmodebetweenONandOFFforeachinput.

ON �� Turns on the 3D mode for the selected input�

NOTE:

Toconrmthatthesupported3Dsignalisaccepted,useeitherwayofthefollowing:

• Makesurethat[3D]isdisplayedinthetoprightofthescreenafterthesourceisselected.

• Display[INFO.]→[SOURCE]→[3DSIGNAL]andmakesurethat“SUPPORTED”isdisplayed.

OFF �� Turns off the 3D mode for the selected input�

[GLASSES]

Selecta3Dglassmethod.

DLP

®

Link �� For 3D eyeglasses (ones manufactured by XPAND are recommended) or DLP

®

Link compatible LCD shutter

eyeglasses�

Others �� For other LCD shutter eyeglasses such as IR or wired LCD shutter types�

[FORMAT]

Sets3Dformat.

NOTE:ThisoptionwillnotworkforVIDEOsource.

AUTO ��Automatically selects the appropriate format� The supported format is HDMI 3D only�

SIDE BY SIDE ��Selects this format for the SIDE BY SIDE 3D image� SIDE BY SIDE is a format that stores the left

and right eye images displayed horizontally� Only the half of the horizontal resolution is supported

TOP AND BOTTOM ��Selects this format for the TOP AND BOTTOM 3D image� TOP AND BOTTOM is a format that stores the

left and right eye images displayed vertically� Only the half of the vertical resolution is supported�

FRAME PACKING ��Selects this format for the FRAME PACKING 3D image� FRAM PACKING is a format that stores the

left and right eye images without compression�

FRAME SEQUENTIAL ��Selects this format for the FRAME SEQUENTIAL 3D image� FRAME SEQUENTIAL is a format that

displays the left and right eye images alternately� This format is available only for COMPUTER

input�

NOTE:

ThisfunctionwillnotworkforVIDEOsource.

Thisoptionisavailableonlywhen[DLP

®

Link]isselectedfor[GLASSES].