User's Manual

CHAPTER 3 NDA-24300

Page 78

Issue 1

SYSTEM MESSAGES

This message displays when a Ready Failure occurs in both systems as a result of the TSW card having a failure

or the card is not mounted properly.

➀

Unit and MG number of fault

detection

Reference: See Chapter 5, Section 5.3, for the repair procedure.

1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000

➀

4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000

7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000

b7 b0

Default Alarm:

4-C

Both TSW Ready Failure

Default Grade:

Grade Modified: Lamp Modified:

b0: 0/1 = TSW No. 0 system/TSW No. 1 system

Note:

When Ready Failure occurs in both systems, the [4-C]

message is separately issued twice: “0” displays in one

message, and “1” in the other message.