User's Manual

NDA-24300 CHAPTER 3
Page 79
Issue 1
SYSTEM MESSAGES
This message displays when a Ready Failure occurs in one of the dual systems because the TSW card fails or
the card is not mounted properly.
➀
Unit and MG number of fault
detection
Reference: See Chapter 5, Section 5.4, for the repair procedure.
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
Default Alarm:
MN
4-D
TSW Ready Failure
Default Grade:
3
Grade Modified: Lamp Modified:
b0: 0/1 = TSW No. 0 system/TSW No. 1 system