User's Manual

CHAPTER 3 NDA-24300
Page 226
Issue 1
SYSTEM MESSAGES
➈ Application Type
[When =03 (SMDR) / 04 (MCI) ]
➉ Device Number of Error detected client PC
Kind of Error
Details on Detected Error
~ Not used
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b0-b7 : (Hex)
01=SUPER SERVER
02=MAT
03=SMDR
04=MCI
05=OAI
06=PMS
07=MIS
9
b0-b7: (Hex)
Device Number of error detected Client PC.
If the Machine Number is not determined, “FF”
is output.
b0-b7: (Hex)
01=SEND Execution Error
02=RECEIVE Execution Error
03=SEND Execution Count Over
04=RECEIVE Execution Count Over
05=System Data is not assigned
06=Time Over
07=Parity Error
08=Connection Error
09=Connection Port Capacity Over
0A=Detection of B-level Infinite Loop
0B~FF=Not Used
11
12
-When 01/02 is output at
b0-b7: Cause of error (Hex)
-When 05 is output at
b0-b7: 01=Data (Data Output via LAN) not assigned
02=Device No. not assigned
-When 07 is output at
b0-b7: 00H=No Parity is set
01H=Odd Parity is set
02H=Even Parity is set
-When 08 is output at
b0-b7: Cause of error (Hex)
11
11
11
11
13
24