User's Manual

CHAPTER 3 NDA-24300
Page 230
Issue 1
SYSTEM MESSAGES
This message displays when the MUX (PH-PC36) card, whose clock function was detected as faulty, is recov-
ered.
➀
Unit, MG number for MUX card,
which recovered from a clock
failure
➁
RLS Data
1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b4 b3 b2 b1 b0
b7 b3 b2 b1 b0
Default Alarm:
NON
33-A
MUX Clock Restore
Default Grade:
3
Grade Modified: Lamp Modified:
b0-b1: Unit number for the recovered MUX card
b2: MG number for the recovered MUX card
b3: 0/1 = fault recovery in the MUX No. 0 system / fault recovery in
MUX No. 1 system
b4: 0/1 = faulty MUX is in ACT/
Faulty MUX is in STBY
RLS Data:Clock alarm information on the recovered MUX card
b1: 0/1 = -/FH failure for 2M PCM Highway
b2: 0/1 = -/CLK failure for 2M PCM Highway
b3: 0/1 = -/4M CLK failure for PM