User's Manual

CHAPTER 4 NDA-24300
Page 284
Issue 1
UNIT/CIRCUIT CARD REPLACEMENT PROCEDURE
3.3 Operating Procedures
The following sections provide operating procedures to replace circuit cards mounted in the PIM. Perform
the operations corresponding to each Reference Item specified in Table 4-3. Note that the procedures as-
sume that the system adopts the dual configuration.
Table 4-3 PIM Circuit Cards and Reference Items
CIRCUIT CARD
FUNCTION NAME
REFERENCE ITEM REMARKS
LC/TRK Section 3.3.1, LC/TRK Circuit Card Replacement
Procedure
MUX Section 3.3.2, MUX Card Replacement Procedure
SDT Section 3.3.3, SDT Card Replacement Procedure
PWR Section 3.3.4, PWR Card Replacement Procedure