User's Manual

NDA-24300 CHAPTER 5
Page 389
Issue 1
FAULT REPAIR PROCEDURES
14. HARD TIME CLOCK FAULT
This section explains the procedure for repairing a hard time clock failure which occurs within the EMA card.
Replace the EMA card.
If the EMA card is removed from the
system while the system is in operation
under the control of the CPU #1, the
system will reset and stop all call
processing. See Section 1.3.2, EMA
Card Replacement Procedure, in
Chapter 4, for detailed instructions.
Replace the EMA card referring to Section
1.3.2, EMA Card Replacement Procedure,
in Chapter 4.
START
END
WARNING