User's Manual

CHAPTER 6 NDA-24300
Page 434
Issue 1
SYSTEM OPERATIONS
9.3 Office Data Management Procedure
The procedure generally taken when changing the office data is shown below.
Figure 6-25 Office Data Change Procedure
HDD_MAT command Note
Direction Select : Verify HDD against MAT
Data Type Select : Data Memory, etc.
MEM_HDD command Note
Direction Select : Verify HDD against MEM
Data Type Select : Data Memory, etc.
Entry Into Office Data Programming Sheets
MEM_HDD command Note
Direction Select : Memory to Hard Disk
Data Type Select : Data Memory, etc.
Entry Into Office Data Programming Sheets
Entry Into Office Data Programming Sheets
HDD_MAT command Note
Direction Select : PBX Hard Disk to MAT
Data Type Select : Data Memory, etc.
CREATION OF DATA CHANGE PLAN
DATA CHANGING
DATA SAVE FROM HDD INTO FD
DATA VERIFY
DATA VERIFY
DATA SAVE FROM MEM INTO HDD
LISTING OFFICE DATA
Note:
Refer to Figure 6-29 for each command function.