User's Manual

CHAPTER 6 NDA-24300
Page 442
Issue 1
SYSTEM OPERATIONS
(c) 3-Party Conference Trunk Test Procedure
Figure 6-31 3-Party Conference Test Procedure
Note:
If the trunk number of the next 3-Party Conference Trunk is not assigned, the test ends.
• Access code is assigned by ASPA command, CI=N,
SRV=SSC, SID=17
• Route numbers to be designated are as follows:
RT NUMBER
909
913
TRUNK NAME
3-party conference trunk
(for station, ATTCON, trunk)
3-party conference trunk
(only for ATTCON)
+“9xx”
RT No.
“xxx”
TRK No.
Lift handset
Is next
register to be
tested, too?
Make switch hook flash
Note
(DT)
Dial access code for
designated connection
(SST)
(SST)
YES
NO
Hang Up
As shown in Figure 6-32,
tone sending is repeated.