User's Manual

NDA-24300 CHAPTER 6
Page 447
Issue 1
SYSTEM OPERATIONS
(f) Trunk Test Procedure
Figure 6-35 Trunk Test Procedure
Note:
If the trunk number of the next trunk is not assigned, the test ends.
• Access code is assigned by ASPA command, CI=N,
SRV=SSC, SID=17
Hang Up
+“9xx”
RT No.
“xxx”
TRK No.
Lift handset
Is next
register to be
tested, too?
Make switch hook flash
Note
(DT)
Dial access code for
designated connection
(RBT)
YES
NO
Dial the called party
number
The called party at the
distant office answers
and talks