User's Manual

CHAPTER 6 NDA-24300

Page 486

Issue 1

SYSTEM OPERATIONS

12.2.6 Peripheral Equipment Initialization (Line/Trunk Initialization)

Line/trunk initialization can be divided into two types: initialization on an indi-

vidual channel basis and initialization on a circuit card basis. Follow the proce-

dure in Table 6-19.

Table 6-19 Line/Trunk Initialization Procedure

ACTION REMARKS

ATTENTION

Contents

Static Sensitive

Handling

Precautions Required

Return MB switch to the

previous position after the

MB lamp has turned ON.

Turn the MB switch UP on

the circuit card.

Use RLST command.

(Refer to Chapter 8)

START

END

Is initialization on

individual channel basis or on

circuit card basis?

Circuit card basis

Individual channel basis

Note:

When initializa-

tion executes on a

circuit card basis, all

channels on the cir-

cuit card are placed

into make-busy state.