User's Manual

CHAPTER 6 NDA-24300
Page 490
Issue 1
SYSTEM OPERATIONS
Table 6-20 Start-Up When Basic & Application Software Is
Installed [Procedure #1]
ACTION
7SEG LED/OPE LAMP/KEY
SETTINGS
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
STATUS LED (right) on
the DSP of CPU is ON.
CPU OPE lamp on the
DSP of active CPU
lights steady green. IMG0-3
lamps flash.
IMG0 lamp on the DSP of mate
CPU flashes green.
STATUS LED (right) on
the DSP of CPU is ON
(ON LINE).
Press the CPU RST button
on the DSP of active CPU.
or
Turn OFF the SW on the PZ-
PW92 of active CPU and
turn it ON again.
Set SENSE switch at “1” (DM
Clear Restart) on the DSP of
CPU #0.
Set SENSE switch at “1” (DM
Clear Restart) on the DSP of
active CPU.
Turn ON the SW on the PZ-
PW92 of CPU #0.
STARTSTART
When Power is OFF
and OFF LINE
A
When Power is ON
➀
➁
• HD Initialization
• Program Load
• System Initial
System starts up, clearing the Office Data on the HD.
• The system starts up again
➂ when Power is ON and ON
LINE
START
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required