User's Manual

NDA-24300 CHAPTER 7
Page 501
Issue 1
ROUTINE MAINTENANCE PROCEDURE
2.4 Collection of System Messages
Cause system messages to be displayed.
When a system message is displayed.
Check the results of routine diagnosis.
When the system is operating normally or
after a fault is restored
Refer to Chapter 3.
If the system message indicates a fault,
diagnose the fault by referring to Chapter 5,
and perform fault recovery.
System message [7-O] indicates that the
system is normal.
System message [7-P] indicates that the system
is abnormal. Perform fault recovery by
referring to Chapter 3 or Chapter 5.
Use the RALM command to clear the alarm
indication and registered system message.
START
END