User's Manual

NDA-24300 CHAPTER 7

Page 507

Issue 1

ROUTINE MAINTENANCE PROCEDURE

2.10 ATTCON/DESKCON Check

(1) Attendant Console Check

Note:

Adjusting Time Method (see Figure 7-2.)

• If the Hour (H) button is pushed once, the time will advance one hour. (To push the button, use a thin

object, such as a toothpick.)

• If the H button is held continuously, the time will advance one hour each second.

• If the Minute (M) button is pushed once, the time will advance one minute.

• If the M button is held continuously, the time will advance one minute each second.

Figure 7-2 Adjusting Time on ATTCON

Ask the operator at each ATTCON if the ATTCON is operating normally.

Each operator presses the LCHK button on the ATTCON and confirms that all the lamps on the

control panel light up.

When the ATTCON is equipped with a Time Indicator Section, the operator also checks the displayed

time.

START

END

STATION/TRUNK NUMBER

TIME

ADJUST.

H M