User's Manual

CHAPTER 8 NDA-24300
Page 598
Issue 1
MBPM: Make Busy of Port Microprocessor
MBPM:
Make Busy of Port Microprocessor
1. Functional Outline
This command sets or resets the make-busy state of the circuit card that contains the port microprocessor. This
setting and resetting is performed individually for each circuit card. If the location of the circuit card containing
the port microprocessor is specified in this command, the operating state of all circuit cards mounted in the
associated unit is displayed.
2. Parameters
Input data
MG
Unit
Group
MB
Display data
MB: 0=Make Idle
1=Make Busy
Note:
Idle/Busy status can be displayed and assigned by the MB parameter.