User's Manual

CHAPTER 8 NDA-24300

Page 604

Issue 1

MBTC: Make Busy of Trunk-Continuous

MBTC:

Make Busy of Trunk-Continuous

1. Functional Outline

This command is used to assign the IDLE/BUSY status of trunks. By using this command, plural trunks can

be placed into IDLE/BUSY state simultaneously per a route designated in “RT” parameter.

2. Parameters

Input Data

RT: Route Number

TK: Trunk Number

Note 1

MB: 0=Make Idle

1=Make Busy (Outgoing)

2=Make Busy (Bothway)

Note 2

Note 1:

Multiple trunks can be assigned simultaneously per a route designated in “RT” parameter.

Note 2:

2=Make Busy (Bothway) is not used.