User's Manual

CHAPTER 8 NDA-24300
Page 608
Issue 1
MEM_HDD: Data Control Between Memory and HDD
MEM_HDD:
Data Control Between Memory and HDD
1. Functional Outline
This command is used to save the following data from MEM of PBX to HDD of PBX, and vice versa.
2. Parameters
Input data
Direction Select: Memory to Hard Disk
Hard Disk to Memory
Verify HDD against MEM
Data Type Selection: Data Memory
Note 1
Name Display
Wireless Call Forwarding
Call Forwarding
Speed Calling
User Assign Soft Key
Number Sharing
Note 2
Call Block
ACD Data Memory
LP Select: This data is valid when Call Forwarding, Speed Calling, User Assign Soft Key,
Number Sharing or Call Block data is designated.
Auto Verify Afterward
Note 1:
When Data Memory is selected, Network Data Memory (NDM) and Local Data Memory (LDM) are
also saved/verified simultaneously.
Note 2:
By saving the Number Sharing data, the data concerning Dual Station Calling Over-FCCS is also
saved/verified automatically.