User's Manual

NDA-24300 CHAPTER 8
Page 617
Issue 1
SINZ: System Initialization
SINZ:
System Initialization
1. Functional Outline
This command initializes the PBX from the MAT. At the time of system initialization, this command allows
the programs and the office data to be loaded from a Hard Disk of PBX into the RAM of PBX.
2. Parameters
Input data
TYPE: Kind of Initialization (1-4)
1=System Initialize
2=System Initialize Office Data Load & System Initialize
3=System Initialize Program Load & System Initialize
4=System Initialize Program & Office Data Load & System Initialize
Note:
When the system is initialized, the MAT is once disconnected. Then, log in to the system again.