User's Manual

CHAPTER 3 NDA-24300
Page 54
Issue 1
SYSTEM MESSAGES
This message displays when link information cannot be written into the switch memory of the TSW card in
one of the dual systems.
➀
TSW system in which a fault is
detected
➁
Status at the time of fault detection
➂
Data Analyzed by NEC Engineers
Reference: See Chapter 5, Section 5.4, for the repair procedure.
1: XXXX XXXX XXXX XXXX 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
b7 b6 b0
Default Alarm:
MN
1-B
TSW Failure (Permanent)
Default Grade:
3
Grade Modified: Lamp Modified:
b0: 0/1 = TSW No. 0/TSW No. 1
b0: 0/1 = TSW No. 0/TSW No. 1
b6: 0/1 = Speech Path in ACT status
No. 0 system/No. 1 system