User's Manual

CHAPTER 3 NDA-24300

Page 56

Issue 1

SYSTEM MESSAGES

This message displays when the link information cannot be written into the switch memory of the TSW card

in one of the dual systems.

➀

TSW system in which a fault is

detected

➁

Status at the time of fault detection

➂

Data Analyzed by NEC Engineers

Reference: See Chapter 5, Section 5.2, Section 5.4, and Section 6.2, for the repair procedure.

1: XXXX XXXX XXXX XXXX 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000

➀ ➁ ➂

4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000

7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000

b7 b0

b7 b6 b0

Default Alarm:

1-D

TSW Write Failure

Default Grade:

Grade Modified: Lamp Modified:

b0: 0/1 = TSW No. 0/TSW No. 1

b6: 0/1 = Speech Path ACT status

TSW No. 0 system is ACT/TSW No. 1 system is ACT