User's Manual

NDA-24300 CHAPTER 3
Page 63
Issue 1
SYSTEM MESSAGES
This message displays when a fault of the speech path system has occurred in a specific Module Group. The
specific Module Group is placed into make-busy state.
➀
MG number of fault detection
➁
Kind of failure
➂
Speech Path/Clock System
Reference: See Chapter 4, Section 2.3.2, for the circuit card replacement procedure.
1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b1 b0
Default Alarm:
MJ
1-S
Module Group Down Failure
Default Grade:
3
Grade Modified: Lamp Modified:
b0: 0/1 = Even-numbered MG/Odd-numbered MG
b0-b7: 00H/01H = -/ACT side TSW fault
b0: ACT side speech path
0/1 = No. 0 system/No. 1 system
b1: ACT side clock
0/1 = No. 0 system/No. 1 system