User's Manual

ND-70185 (E) CHAPTER 5
Page 97
Revision 3.0
DATA PROGRAMMING
Assignment of FCH Related Data
7.3 FCCS Link via Internet/Intranet
The system can exchange FCCS data via the Internet/Intranet. As shown below, an FCCS Link can be es-
tablished by using the following features:
• External Router
• Fusion over IP
7.3.1 External Router
This feature allows the system to exchange the FCCS data via the Internet/Ethernet. For this feature, an
FCCS link is connected to an external router.
Figure 5-39 External Router - Overview
Figure 5-40 Hardware Connections for External Router
Fusion
Network
Internet/
Intranet
FCCS link
FCCS signaling is exchanged via the Internet/Intranet.
POWER
POWER
Speech Data for Fusion
Router
Router
Node A
Node B
Signaling data for Fusion
HUB
Speech
ROUTER
signaling
CPU
PBX
FCH
FCH
FGH
DTI
HUB
DTI
DTI
LANI
(slot 00 / 03)
LoopBack
Fusion
Network
Internet/
Intranet
10BASE-T
ACRD
ACTK
AFCH
AFPC
ACAN
ACRD
ACTK
AGIP
AETH
DTI: Digital Trunk Interface
FCH: Fusion Control Handler (PA-FCHA)
FGH: Fusion Gateway Handler (PA-FCHA)
LANI: LAN Interface (PZ-PC19)
POWER
<Procedure>
1. Using two DTI cards, make a loop connection.
2. Mount FCH, FGH cards. Then, connect the DTI and
FCH/FGH cards, respectively, by using the front cable.
3. Connect two LANI cards and HUB cards, respectively.