User's Manual

CHAPTER 5 ND-70185 (E)
Page 100
Revision 3.0
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 3: AFCH
Assign FCH number on an FCH circuit card basis. In the following example, FCHN=1 is assigned
for the FCH circuit card. For the FGH card, FCHN assignment is not necessary.
Figure 5-43 Assignment of FCHN (Example)
STEP 4: AGIP
Assign IP addresses of FGH card and its connected router.
FCHEN (FCH Equipment Number): Assign LV0 data of FGH LENs.
FGH_IP (FGH IP Address): Assign IP address of the FGH card.
DG_IP (Default Gateway IP address): Assign IP address of the router.
ARP (ARP Frame Type): Assign "2 (=DIX spec.)".
CONTTYP (Voice Channel Control Type): Assign "1 (=Server)".
LINK_NUM (Qsig-Prime Link Number) : Assign the number (1-32) of interfaces for speech (=total
DTI card number).
CSLINK_NUM (Client /Server Connection Max. Number): Assign "0".
FCHN
1
FCHEN
000030
AFCH command display
Note 1
Note 1 : This setting is a sample.
Note 2: This card cannot be used as a CCIS #7 signaling channel.
CPU
PBX
LANI
FCH
FCH
FGH
DTI
HUB
HUB
DTI
DTI
Signal
ROUTER
RT14
RT15
RT11
RT10
External LAN
Internal LAN
Fusion Network
MDF
Speech
FCHN=1
FCHEN: 000030
IP address: aaa.aaa.aaa.a
IP address: xxx.xxx.xxx.x
Note 2