User's Manual

CHAPTER 3 ND-70185 (E)

Page 22

Revision 3.0

SYSTEM CONFIGURATION

System Considerations

The following explains service conditions for the network including both FCCS and CCIS links.

Example: 1

When the network comprises FCCS and CCIS links

Figure 3-14 Centralized Management Report-Fusion (Example 1)

Node A: To send system messages to Node C via Office B, assign Point Code of Node C (12) to ASYD, SYS

1, Indexes 184 and 185.

Node B: To send system messages to Node C, assign Fusion Point Code of Node C (3) to ASYDL, SYS1, Index

532. When this system data is assigned, system messages received from Node A are also transferred

to Node C. However, when data is not assigned (0), system messages received from Node A are ig-

nored and not transferred to Node C.

System messages received from Node A are not output to the system message printer connected to

Node B.

Node C: Received system messages are stored in the memory area for Centralized Management Report-Fusion.

Node D: To send system messages to Node C, assign Fusion Point Code of Node C (3) to ASYDL, SYS1, Index

532.

Centralized MAT

Center Node: Node C

Fusion

NEC

13-H

1. xxxx xxxx 0010 1222

4. x0010 1110 10110 1FFF

7. E23C CAAB12 000 0000

NEC

PRT

PC=10 FPC=4

PC=11

FPC=2

PC=12

FPC=3

Node B Node C

Node A Node D

FCCS

CCIS