User's Manual

CHAPTER 4 ND-70185 (E)
Page 32
Revision 3.0
INSTALLATION
Key Setting on Circuit Cards
2. Key Setting on Circuit Cards
2.1 PA-M96 (HUB)
Set the SEL switch on the HUB (PA-M96) card(s), after referring to Figure 4-4 and Table 4-1.
Figure 4-4 Switch Setting on HUB (PA-M96) Card
Table 4-1 SENSE Switch Setting
SWITCH NAME SETTING
STANDARD
SETTING
DESCRIPTION
SENSE
0 Polarity indication on the STn lamps for TPn-Xports.
1 Not used.
2 × TPn-X ports operate as a repeater HUB. (Standard setting)
3
Data-Packet-Collision indication on the STn lamps for TPn-X
ports.
4-F Not used.
Set the SENSE Switch arrow to the proper direction,
referring to Table 4-1.
SENSE Switch
HUB (PA-M96) Card
HUB (PA-M96) Card
4
C
0
2
6
A
E
.
.
4
C
0
2
6
A
E
MB
OPE
CR7
CR0
ST7
ST0
SENSE
TP7-X
TP6-X
TP5-X
TP4-X
TP3-X
TP2-X
TP1-X
TP0-X
4
C
0
2
6
A
E
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
~
~
Note:
1 and 4 to F of the SENSE Switch are not available in this version.
4
C
0
2
6
A
E