User's Manual

CHAPTER 4 ND-70185 (E)
Page 40
Revision 3.0
INSTALLATION
Mounting Circuit Cards in PIM
3. Mounting Circuit Cards in PIM
3.1 Mounting HUB (PA-M96) in a PIM
Mount the HUB (PA-M96) card in an appropriate slot of a PIM as shown below. When the MAT is con-
nected via a HUB card, be sure to use a dedicated HUB for the Fusion link.
Note:
HUB (PA-M96) can be mounted wherever in a PIM of any IMG stack. However, if your system is 1-IMG
type, mount the HUB in PIM0.
Figure 4-7 Mounting HUB Card in PIM 0
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
HUB
HUB
PA-M96
Anti-static Kit
PIM 1
PIM 0
Mount a HUB card in an appropriate slot providing the anti-static kit.