User's Manual

CHAPTER 5 ND-70185 (E)
Page 68
Revision 3.0
DATA PROGRAMMING
Assignment of Numbering Data for Telephone Numbers
STEP 2: ANPDN
Assign Pre-translation Data for the Telephone Numbers planned in Step 1 using the ANPDN com-
mand at NCN. In Figure 5-14, the data setting should be as follows:
Figure 5-14 ANPDN Sample Data Sheet
The ANPDN command display should look similar to the following:
Figure 5-15 ANPDN Command Display
Note:
Perform the Numbering Plan data setting by using ANPD command in the same way as assigned by
ANPDN command.
- ANPDN Data Sheet (example)
- NCN (Node A)
TN = 1 1st DC = 4 CI = N (Normal) NND = 6 BLF = 0
TN = 1 1st DC = 4 CI = H (Hooking) NND = 6 BLF = 0
4 x x x x x
Telephone Number
6 digits
TN
NND
1stDC
BLF
CI
ANPDN (Assignment of Numbering Plan for Network Data Memory)
1
N
1
4
6
CI (Connection Index)
N: Normal
H: Hooking
B: Busy
NND (Necessary Digit): 1 - 16 digits
1stDC (1st Digit Code): ASCII 0 - 9, *, #
BLF (Busy Lamp Field):
0: Out of Service
1: In Service