User's Manual

CHAPTER 5 ND-70185 (E)
Page 70
Revision 3.0
DATA PROGRAMMING
Assignment of Telephone Numbers
6. Assignment of Telephone Numbers
This section explains how to program Telephone Numbers. To program Telephone Numbers, use ALGSN com-
mand. Telephone Number can be assigned to a station using the LENs or the Physical Station Number depend-
ing on programming.
Note:
The Fusion Link must be operational before programming telephone numbers in the Fusion Network.
COMMAND: ALGSN/ATSTN
Assign Telephone Numbers to Physical Station Number (Type 2) or to physical LENS (Type 1) using
the ALGSN/ATSTN command. An example data sheet-Type 2 follows.
Figure 5-18 ALGSN Sample Data Sheet
- ALGSN Data Sheet (example)
- NCN (Node A)
Node A
Node B
Node C
Node D
:
:
:
:
Type = 2 UGN = 1 TELN = 410000 FPC = 1 TN = 1 STN = 2000
Type = 2 UGN = 1 TELN = 410001 FPC = 1 TN = 1 STN = 2000
Type = 2 UGN = 1 TELN = 420000 FPC = 11 TN = 1 STN = 2000
Type = 2 UGN = 1 TELN = 430000 FPC = 12 TN = 1 STN = 2000
Type = 2 UGN = 1 TELN = 440000 FPC = 13 TN = 1 STN = 2000
Telephone Number
Physical Station Number
Note:
This data is a sample when the Telephone Number is assigned by the ALGSN command.