User's Manual

Page 1 of 3

INSTALLATION MANUAL

FLOOR ANTENNA

EQ 45-F

February 07, 2012 Part#: 9886168

This information is furnished for guidance, and with no guarantee as to its accuracy or completeness;

Its publication conveys no license under patent or other right, nor does the publisher assume

Liability for any consequence of its use; specifications and availability of goods mentioned in it are

Subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the

written consent of the publisher.

PAGE 1
® INSTALLATION MANUAL FLOOR ANTENNA EQ 45-F February 07, 2012 Part#: 9886168 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; Its publication conveys no license under patent or other right, nor does the publisher assume Liability for any consequence of its use; specifications and availability of goods mentioned in it are Subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the pub
PAGE 2
INSTALLATION 1 Make a hole in the floor 1810mm x 710mm with a depth of 74 mm. Equalize the surface with fluid concrete or another material to equalize the surface. 2 Fit the antenna in the hole and mark the drill holes to drill 8 holes with a diameter of 10mm deep 80mm. 3 Place the Antenna assembly 9886168 in the hole and fix the antenna assembly so that the surfaces from the floor and antenna are equal.
PAGE 3
Page 3 of 3