Home Connect Guide

11 EN

Step 2.1: Connect your extractor hood to

your home network with WPS

Please enter step 2.1 only when prompted to by the app.

The following steps describe operations at the home

appliance itself.

Note:

To connect the extractor hood to your home

network, the hood and the light must be switched

o. You can cancel the process at any time by

pressing

1 | Press and hold the

and symbols on your extractor hood

at the same time until the

and - indicators start to ash.

Control panel model 1

Control panel model 2

2 | Touch the +symbol to start automatic login to your home

network.



and

‚

ash.

3 | Activate the WPS function on your home network router

within the next 2 minutes.

If connection to the home network is successful,

and

„

ash.

The app will get notied once your extractor hood has been

successfully connected to your Wi-Fi network.

4 | Follow the instructions in the app.

Information:

If the connection could not be established within

2 minutes, make sure your extractor hood is within

the range of your Wi-Fi network.

For some appliances the WPS mode is also called

"automatic mode".