Home Connect Guide

12 EN

Step 2.2: Connecting the extractor hood

to your home network, step by step

Follow the instructions in Step 2.2 only if the app tells

you to. The following steps set out how to perform this

operation on the appliance itself.

Note:

To connect the extractor hood to your home

network, the hood and the light must be switched

o. You can cancel the process at any time by

pressing

1 | Press and hold the

and symbols on your extractor hood

at the same time until the

and - indicators start to ash.

Control panel model 1

Control panel model 2

2 | Touch the + symbol twice to start manual login to your home

network.



and

ash.

The appliance will open a temporary Wi-Fi network,

"Home Connect", for a few minutes with the password

"HomeConnect".

Using this temporary Wi-Fi network, the app will

transfer the name (SSID) and the password of

your home network to the extractor hood, thereby

enabling the extractor hood to connect to your

home network.

If connection to the home network is successful,

and

„

ash.

3 | Follow the instructions in the app.