Repair Instructions
Table Of Contents
- Repair Hints
- bg
- hr
- cs
- da
- nl
- en
- et
- fi
- fr
- de
- el
- hu
- it
- Utilizzo del documento
- Sicurezza
- Strumenti e ausili
- Riparazione
- lv
- lt
- no
- pl
- pt
- Sobre este documento
- Segurança
- Ferramentas e auxiliares
- Reparação
- ro
- Referitor la acest document
- Siguranța
- Instrumente și materiale utile
- Repararea
- sk
- sl
- es
- sv
- tr
4.2 Replacing flat hinge
Required tools:
Torx Bit TX20 6,3mm (1/4") [00340865]
Warning
Heavy, bulky appliances!
Back and muscle injuries
▶
Appliance door removal operation should only be carried out by
trained specialists.
▶
To move the appliance, two people are required.
▶
Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
▶
Wear protective gloves.
Caution
Open hinge area!
Finger crushing / entrapment
▶
Do not reach into the hinge area.
▶
Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶
Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Furniture door is removed. See Installation Instruction.
Door is open.
4.2.1 Removing flat hinge
Take care that hinges do not close during removal / installation.
1. Remove two hinge covers.
Repair
2021-03-10_9001628792 Copyright by BSH Hausgeräte GmbH Page90of385