User's Manual

The transmitter is supplied with a power cord consisting of DC and AC wiring
connected with a transformer. In many cases an AC power outlet may need to
be installed in the cabinetry where the transmitter is to be installed. Local codes
must be followed and the AC outlet often must be installed by a licensed
electrician.
The adapter shall be installed near the equipment and shall be easily accessible.
E. LED INDICATOR
The LED will indicate the current transmitter status.
F. TRANSPORTATION
The greatest risk of physical damage to the transmitter will be between
transmitter installation and fabricated top installation in the facility. Protect the
transmitter during storage and transportation. One option for protecting the
transmitter is to cut a cavity large enough to contain the transmitter in a piece of
stiff foam. This foam can then be taped over the transmitter for protection.
G.REFERENCES
Off No power/inactive
Power On One green flash
Charging Continuous flashing green
End-of-charge Solid green
Foreign object detected Flashing red
Error condition Solid red