Operation Manual

Image effects

5.2.2 Color Balance

You can correct the color of the picture with Nero PhotoSnap and, for example, remove a

color cast. Correction options in RGB

and HSL modes are available for that purpose in the

Color/Color balance area.

You can perform the color balance with the RGB tab in RGB

mode: colors are defined with

combinations of the three primary colors red, green and blue. The color balance can be per-

formed on the HSL tab in HSL

mode: colors are defined by a combination of hue factors, sa-

turation and lightness.

Color Balance, Tabs, RGB Area

The following input options are available on the RGB tab:

Slider

Red / Green /

Blue

Regulates the amount of color. Slide the regulator to the right to increase

the amount of color (up to 100%). Slide the regulator to the left to de-

crease the amount of color (to 0%).

Button

Auto-remove

color cast

Automatically balances an existing color cast.

The following input options are available on the HSL tab:

Slider

Hue

Regulates the primary colors. Slide the regulator to the right or left to

change the primary color hue of each pixel.

Slider

Saturation

Regulates the saturation of the colors. Slide the regulator to the right to

increase the saturation or to the left to decrease.

Slider

Brightness

Regulates the saturation of the colors. Slide the regulator to the right to

increase the saturation or to the left to decrease.