Owner's Manual

There for you.
Set up and test
Nest Protect glows blue during setup and
testing. Use
the Nest app to tell each
Nest Protect where
it will be. The app is
available
for both iOS and Android.
Once your alarms are set up and installed,
run a manual
test by pressing the Nest
button twice. All the alarms in your home
will test themselves and let you know
everything's working well.
Know you're safe
Nightly Promise
Nest Protect constantly checks its sensors
and
batteries. When you turn off the lights
for the night, look for a quick green glow-
that means it's working. Sweet dreams.
If it glows yellow when you turn out the lights,
Nest Protect has a message for you. Just
push the Nest button or open the app to see
what's wrong. The batteries may be low,
Wi-Fi
might have gone down or a sensor may
not be working.
A light in the dark
Path light
When it's dark, Nest Protect lights your
way
as you walk underneath it. To see how
often Path light is turning on, check the
Nest app. If your Nest Protect is wired, you
can
set Path light to Always On and it will
glow whenever the room is dark.
An early warning
Thinks before
it speaks
Nest Protect gives you a friendly Heads-Up
before
it sounds the alarm. The light ring
pulses yellow and
it calmly tells you what
the danger is and where it is.