Instructions / Assembly

THANK YOU FOR SHOPPING WITH US
WE WANNA HEAR YOUR VALUABLE VOICE:)
Steps to Install
SMILE AT
Figure out a place that you wanna hang
the mirror. Then mark the height using a
pencil align a ruler with the top of the
holes on the back of the mirror
#01
Point on the wall with a power drill,
and drill a pilot hole for the anchor
#02
Insert the anchor and gently hammer it
until they are both flush with the wall
#03
Next insert the screw into the
anchor make sure there is 1/8 of an
inch between a screw and the wall
#04
Carefully attach the mirror to the wall
with the screw and clean the mirror
#05
YOURSELF IN THE
MIRROR :)
If you have any questions, please feel free to contact us.
Email: [e-mail]