InModem Quick Start Guide

Rev.2 - YML609 www.netcomm.com.au
InModem56 V.92 Page 11
Step 4 - Registering your Modem
To ensure that the conditions of your warranty are complied with, please go to the
NetComm web site for quick and easy registration of your InModem 56 at
www.netcomm.com.au
Alternatively, you can print out a copy of the Warranty Registration Form and mail it to
NetComm Limited, PO Box 1200, Lane Cove NSW 2066.
Note: You will need to install Adobe Acrobat Reader (refer to the instructions
in “Step 3 - Installing your Software”) before opening the Warranty
Registration Form at “D:\Manuals\Warranty Registration Form.pdf”
where D:\ is the letter of your CD-ROM drive.
Troubleshooting
To un-install your InModem 56 driver:
1. Select “Start” and then “Run”.
2. Type in “LTRemove” and click “OK”.
3. You will be prompted with a warning advising that your are about to remove all your
modem drivers. Select “Yes” to continue.
4. You will be prompted to restart. Select “Yes” or “Restart Now”.
5. Follow the Step 2 - Installing your Driver instructions to reinstall the InModem 56
driver if required.
Contact Information
If you have any technical difficulties with the modem, please do not hesitate to contact
NetComm’s Customer Support Department.
Email: [e-mail]
Fax: [phone]
Web: www.netcomm.com.au