Owner's Manual

LED
Description
5 GHz WiFi
• Solid
green.
The 5 GHz radio
is
on.
Ethernet
• Blinking
green. The 5 GHz radio
is
transmitting
or
receiving data.
• Blinking amber.
WPS
(Wi-Fi Protected Setup)
is
active.
•
Off
.
The 5 GHz radio
is
off.
• Solid
green.
A device
is
connected
to
an
Ethernet
port
and powered on.
Each
Ethernet
port
provides
two
port
LEDs
on
the
back
panel.
• Blinking
green.
An
Ethernet
port
is
transmitting
or
receiving data.
•
Off
.
No
device
is
connected
to
an
Ethernet
port.
WiFi
On/Off
button
Pressing this
button
for
three seconds turns
the
WiFi
radios
•
in
the
modem router on and off.
If
the
2.4 GHz WiFi and
5 GHz WiFi
LEDs
are
lit,
the
WiFi radios are on.
If
these
LEDs
are off,
the
WiFi
radios are turned
off
and you cannot
WPS
button
use WiFi
to
connect
to
the
modem router.
Pressing this
button
for
three seconds activates
WPS
(Wi-
Fi
Protected Setup)
for
two
minutes
to
let
you add a
WiFi device
to
the
WiFi
network
without
typing
the
WiFi
password.
While
WPS
is
active,
the
2.4 GHz and 5 GHz
WiFi
LEOs
blink
amber.
Install Your Modem Router
);;;>
To
install
your modem router:
1.
Collect
your
Comcast
account number, account phone number,
and
login
information
(your
email
address
or
user name and
password).
2.
Connect
a
coaxial cable.
Use
a
coaxial cable
that
is
provided by
your
cable
company
to
connect
the
cable
port
on
the
modem
router
to
a
cable wall
outlet
or
a line splitter.
Note: For Xfinity
cable Internet service, Comcast
Xfinity recommends
connecting
your
modem router
to
a
cable wall outlet.
4