Owner's Manual

Security
78
R6250 Smart WiFi Router
2. Select the Port Triggering radio button.
3. Clear the Disable Port Triggering check box.
Note: If the Disable Port Triggering check box is selected after you configure
port triggering, port triggering is disabled. However, any port triggering
configuration information you added to the router is retained even
though it is not used.
4. In the Port
Triggering Timeout field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires.
This is required because the router cannot be
sure when the application has terminated.
 To add a port triggering service:
1. On the Port
Triggering screen, click Add Service.
2. In the Service Name field, type a descriptive service name.
3. In the Service User list, select Any
, or select Single address and enter the IP address of
one computer.
• Any (the default), allows any computer on the Internet to use this service.