Installation Guide

Installation Guide for the 9 dBi Omni-directional Antenna ANT2409

1-4

v1.0, April 2008

Flat Surface Mounting Configuration

This illustration shows a flat surface mount configuration.

For wall mount installation, the L-bracket is not used.

Placement and Other Important Considerations

Before installing your wireless antenna, observe the placement considerations.

Antenna placement dramatically affects potential coverage. Follow these

guidelines to maximize coverage:

• Place the antenna in a vertical position. Either right side up or up-side-down is

OK.

• Place the antenna in the middle of the coverage zone and at 1.5m or higher

above the floor.

Figure 1-3

Wall Mount