Owner's Manual
Table Of Contents
- Installation Guide
- User Manual
- Table of Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use Smart Setup to Connect the Extender to a Network
- Add a WPS Client to the Extender Network
- Change the Basic WiFi Settings
- Change WiFi Security Settings
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- View or Change the Internet IP Address Setting
- Enable NAT in the Extender
- Manage Profiles
- Operating Mode
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- Factory Default Settings
- Specs
Install Your Extender
12
AC750 WiFi Range Extender
Note: If you are not automatically directed to NETGEAR genie, launch a web
browser and enter www.mywifiext.net in the address field. Enter
admin for the user name and password for the password.
Smart setup detects the position of the extender switch.
The extender finds the 2.4 GHz wireless networks in your area and displays a list.
4. Select a 2.4 GHz WiFi network to extend and click the Continue button.
5. T
o select the network you want the extender to join, do one of the following:
• Select the radio button for the network.
• Select the Manually input my wireless SSID radio button and type the name of the
network.
6. Enter the security settings for the network that you selected.
The extender finds the 5 GHz WiFi networks in your area and prompts you to select a
5 GHz WiFi network
.
7. In the Password field, type the network password (also called passphrase or security key)
and click the Continue button.
8. Select the Private Network or Public Network radio button, and click the Continue button.