Owner's Manual
Table Of Contents
- Installation Guide
- User Manual
- Table of Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use Smart Setup to Connect the Extender to a Network
- Add a WPS Client to the Extender Network
- Change the Basic WiFi Settings
- Change WiFi Security Settings
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- View or Change the Internet IP Address Setting
- Enable NAT in the Extender
- Manage Profiles
- Operating Mode
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- Factory Default Settings
- Specs
Install Your Extender
13
AC750 WiFi Range Extender
9. In the Name (2.4G SSID) and Name (5G SSID) fields, type names (SSIDs) for your new
extender WiFi network and click the Continue button.
Note: You can use the same security settings as your existing network by
selecting the check box.
The settings are applied and the following screen displays:
10. Use a WiFi network manager on the computer or mobile device to connect to the extender’s
newly created WiFi network.
11. Use your password to connect.
12. Select the check box and click the Continue button.
13. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.