Owner's Manual
Table Of Contents
- Installation Guide
- User Manual
- Table of Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use Smart Setup to Connect the Extender to a Network
- Add a WPS Client to the Extender Network
- Change the Basic WiFi Settings
- Change WiFi Security Settings
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- View or Change the Internet IP Address Setting
- Enable NAT in the Extender
- Manage Profiles
- Operating Mode
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- Factory Default Settings
- Specs
Manage the Extender Network and Settings
21
AC750 WiFi Range Extender
The extender finds the 2.4 GHz wireless networks in your area and displays a list.
5. To select the network you want the extender to join, do one of the following:
• Select the radio button for the network.
• Select the Manually input my wireless SSID radio button and type the name of the
network.
6. Enter the security settings for the network that you selected.
The extender finds the 5 GHz WiFi networks in your area and prompts you to select a
5 GHz WiFi network
.
7. If your router or gateway broadcasts a 5 GHz WiFi network, select it from the list. Otherwise,
click the Skip button.
The extender prompts you to specify whether the network is private or public.
8. Specify if the network that you selected is private or public:
• If your network is private, leave the Private Network radio button selected.
• If you are connecting the extender to a public network, select the Public Network
radio button.
Selecting the Public Network radio button enables a firewall to protect your
computer from others who are sharing this public network.