Owner's Manual
Table Of Contents
- Installation Guide
- User Manual
- Table of Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use Smart Setup to Connect the Extender to a Network
- Add a WPS Client to the Extender Network
- Change the Basic WiFi Settings
- Change WiFi Security Settings
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- View or Change the Internet IP Address Setting
- Enable NAT in the Extender
- Manage Profiles
- Operating Mode
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- Factory Default Settings
- Specs
Manage the Extender Network and Settings
22
AC750 WiFi Range Extender
9. Click the Continue button.
You are prompted to name the extender networks.
By default, the extender network names are the same as the networks that you selected
with _2GEXT and _5GEXT at the end.
10. Either change the names or leave them as they are and click the Continue button.
The settings are applied and the following screen displays:
11. Use a WiFi network manager on the computer or mobile device to connect to the extender’s
newly created WiFi network.
12. Use your password to connect.
13. Select the check box and click the Continue button.