Owner's Manual
Table Of Contents
- Installation Guide
- User Manual
- Table of Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use Smart Setup to Connect the Extender to a Network
- Add a WPS Client to the Extender Network
- Change the Basic WiFi Settings
- Change WiFi Security Settings
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- View or Change the Internet IP Address Setting
- Enable NAT in the Extender
- Manage Profiles
- Operating Mode
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- Factory Default Settings
- Specs
Manage the Extender Network and Settings
25
AC750 WiFi Range Extender
devices cannot use WPA2. By default, the WPA-PSK [TKIP] + WPA2-PSK [AES] radio
button is selected so that new or old computers and wireless devices can connect to the WiFi
network by using either WPA2 or WPA security.
To change the WiFi security setting:
1. Connect a computer or mobile device to the extender
’s network.
2. Launch a web browser and enter http://www
.mywifiext.net in the address field.
A login screen displays.
3. Enter admin for the user name and enter your password.
If you have not yet personalized your password, type password for the password.
4. Select Setup > W
ireless Setup.
5. Under Security Options, select a radio button.
The Passphrase field displays.
6. In the Password (network key) field, enter the network key (password) that you want to
use.
It is a text string from 8 to 63 characters.
7. W
rite down the new password and keep it in a secure place for future reference.
8. Click the Apply button.
Your changes are saved.