Owner's Manual
Table Of Contents
- Installation Guide
- User Manual
- Table of Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use Smart Setup to Connect the Extender to a Network
- Add a WPS Client to the Extender Network
- Change the Basic WiFi Settings
- Change WiFi Security Settings
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- View or Change the Internet IP Address Setting
- Enable NAT in the Extender
- Manage Profiles
- Operating Mode
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- Factory Default Settings
- Specs
Supplemental Information
46
AC750 WiFi Range Extender
Factory Default Settings
The following table includes the factory settings for the extender. You can use the Factory
Reset button or the Erase feature to return the extender to these settings. (See Return the
Extender to Its Factory Settings on page 37.)
Table 2. Factory default settings
Feature Setting
Setup Wizard Enabled
Wireless communication Enabled
Wireless network names (SSID)s • 2.4 GHz network: EX6100_NETGEAR_2GEXT
• 5 GHz network: EX6100_NETGEAR_5GEXT
Security Disabled
Transmission speed Auto
1
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region Varies by region
Operating mode 802.11ac, 802.11n, 802.11g, 802.11b, 802.11a
Data rate Up to 300 Mbps for 2.4 GHz network and 433 Mbps for 5 GHz network
DHCP Client enabled
Technical Specifications
The following table includes the product specifications.
Table 3. Technical specifications
Feature Default behavior
Network protocol and standards
compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS
relay
, NAT (many-to-one)
Power consumption 100–240V~ 50/60 Hz, 0.21A maximum
Physical specifications • Dimensions: 122 x 74 x 38 mm
• W
eight: 0.213 kg