Owner's Manual
Table Of Contents
- Installation Guide
- User Manual
- Table of Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use Smart Setup to Connect the Extender to a Network
- Add a WPS Client to the Extender Network
- Change the Basic WiFi Settings
- Change WiFi Security Settings
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- View or Change the Internet IP Address Setting
- Enable NAT in the Extender
- Manage Profiles
- Operating Mode
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- Factory Default Settings
- Specs
9
4. Select a 2.4 GHz WiFi network to extend and click the Continue
button.
5. Type the network password (also called passphrase or security
key) in the Password field, and click the Continue button.
6. Select a 5 GHz WiFi network to extend and click the Continue
button.
If your router does not support the 5 GHz band, click the Skip
button.
7. Type the network password (also called passphrase or security
key) in the Password field, and click the Continue button.
8. Select the Private Network or Public Network radio button, and
click the Continue button.